• Home
  • Equipment
    • Standard Reverse Osmosis Systems
    • Seawater Reverse Osmosis Systems
    • De-Ionized Water Systems
    • Microfiltration Systems
    • Ozone Generation Systems
    • Filtration Systems
    • Home Systems/Light Commercial
  • Services
    • HVAC Chemical Programs
    • Precious Metal Recovery
    • Environmental Consulting
    • Industrial Wastewater Recycling
  • Tanks
    • Polyethylene Water Storage Tanks
    • Skid Mounted Pressure Washers with Tanks
  • About
    • Corporate Linecard
    • Corporate Resume
    • In the News
  • Contact
  • Humatador
  • Cubit Clean

Advanced Water Engineering

Public Water Systems,Commerical/Industrial Water Systems

Call AWE at 321-777-4909
You are here: Home / De-Ionized Water Heaters

De-Ionized Water Heaters

diheatf

DI water heater details

DI water heater options and specs

Heating Coil:

  1. Double wall tubing with leak detection port (F30 and F60 sizes only).
  2. Alternate tubing materials:
    Admiralty, 90/10 Copper-Nickel,
    Stainless Steel (Type 304 or 316),
    Other:_______________
    Note: Tubing materials other than copper will exhibit lower maximum capacities. To determine actual capacity, multiply the GPM rating on page 6 by the following:
    0.95 Admiralty
    0.81 90/10 Copper-Nickel
    0.81 Stainless Steel
    Steam Shell
  3. Alternate shell construction:
    Cast Steel, Cast Bronze, 90/10
    Copper-Nickel, Stainless Steel
    (Type 304 or 316),
    Other:____________

Operating Controls
4. In order to limit the steam pressure in the heat exchanger shell a steam pressure reducing valve is factory supplied and shipped loose for in-the-field installation.

5. Single solenoid safety system opens the sensing line to the blending valve in order to limit the hot water output
in the event of an over temperature condition. Requires 5 Amp, 120 Volt service.

6. Double solenoid safety system opens the sensing line to the blending valve as well as closing the steam supply to the heat exchanger in the event of an over temperature condition. Requires 5 Amp, 120 Volt service.

7. All steam components (traps, strainers) shall be Cast Steel construction.

8. If water hardness exceeds 120 ppm, scale build-up can reduce efficiency. A factory packaged Klean-Koil KitTM
with built-in connections will allow for quick and easy in-place cleaning of the coil to remove these deposits thereby avoiding long periods of down time and expensive maintenance costs.

9. All 316 Stainless Steel wetted part construction for use in Deionized water applications. nRecirculation Packages (pump by others)

10. Fixed temperature (____ oF) 3-way diverting valve, one (1) 1″ globe valve, and two (2) 1″ check valves are shipped loose for in-the-field installation.

11. Same as Option 10 except the 3-way diverting valve has an adjustable range.

12. Option 10 or 11 is factory fitted and piped to the water.

FOR MUCH MORE INFORMATION PLEASE E-MAIL : [email protected].

Click Below to Learn More

waterdrop18 STANDARD REVERSE OSMOSIS SYSTEMS

waterdrop18 SEAWATER REVERSE OSMOSIS DESALINATION

waterdrop18 DE-IONIZATED WATER SYSTEMS

waterdrop18 MICROFILTRATION SYSTEMS

waterdrop18 OZONE GENERATION SYSTEMS

waterdrop18 LIQUID BAG FILTER SYSTEMS

waterdrop18 HOME SYSTEMS/LIGHT COMMERCIAL

waterdrop18 HVAC CHEMICAL PROGRAMS

waterdrop18 PALLADIUM RECOVERY

waterdrop18 PRECIOUS METAL RECOVERY

waterdrop18 ENVIRONMENTAL CONSULTING

waterdrop18 INDUSTRIAL WASTEWATER RECYCLING

waterdrop18 POLYETHYLENE WATER STORAGE TANKS

waterdrop18 SKID MOUNTED PRESSURE WASHERS WITH
TANKS

waterdrop18 CORPORATE LINECARD

waterdrop18 CORPORATE RESUME

waterdrop18 WATER ANALYSIS, SAMPLING AND TESTING

waterdrop18 PERFORMANCE BASED SEPTIC TREATMENT

waterdrop18 USED DE-IONIZATION AND INDUSTRIAL
EQUIPMENT

waterdrop18 LABORATORY DI AND RO-DI SYSTEMS

De-Ionized Water Systems · Water Softening Equipment · Ion-Exchange Equipment · Specialty Filters and Filtration Equipment · Bacterial and Biological Filtration · Reverse Osmosis and Membrane Filtration Equipment for Water and Waste Purification · Reverse Osmosis Drinking Water Plants · Potable Water Plants · Industrial Waste Treatment and Recycling · Industrial water Recycling · Hazardous Waste Consulting · Heavy Metal Removal/Recovery · Precious Metal recovery · Cooling Tower and Boiler Chemistries and Controls · Ozonation and Half-Oxygen Systems · Environmental Consulting and Inspections (Phase I and Phase II) · Environmental Remediation (Phase III) · Emergency Spill Response · Engineering Services · and Permitting Services


Copyright © 2025 · Advanced Water Engineering, Inc. | Privacy Notice
Indian Harbour Beach, FL 32937 USA
ph. 321-777-4909
fx. 321-773-8338